Installation and trial run of cherry beater
Time：2021-04-07 09:09 Browse：277
Performance characteristics of cherry beater
Cherry beating machine has single, double, two forms, pulp, slag automatic separation
Screen: cylindrical,
Aperture: a variety of aperture, according to user requirements
Beating speed: 860r / min (variable frequency speed regulation can be set)
Installation and trial run of cherry beater
1. The equipment shall not be impacted or vibrated violently during shipment;
2. When the beater is installed, it is recommended to fix it with foot bolts. When the quality of the ground is good, it can be fixed with expansion screws;
3. After the device is finished, the dirt inside the machine should be removed, and the spindle rolling sensitivity and no jamming phenomenon should be checked;
4. Add proper amount of oil to the bearing seat to make the bearing smooth, which will be the case in every shift in the future. (Note: it is necessary to change the oil in the bearing seat frequently! Operation process: first put the bearing
Open the oil drain hole at the bottom of the bearing pedestal to drain the dirty oil, and then inject oil from the upper part of the bearing pedestal.)
5. After the power supply is connected, it is necessary to check the motor steering with empty vehicle to ensure that the motor steering and the steering symbol of the machine are the same, and then the vehicle can be started.
